Вся информация на сайте предназначена только для специалистов кабельной отрасли, энергетики и электротехники.
+
 

SL Series Compact Loose Central Tube Fiberoptic Cable

image

APPLICATIONS

  • Both indoor and outdoor
  • Ducts, aerial installations and direct burial (armored option)
  • Distribution and general purpose cables

CABLE DESCRIPTION

The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube.
A wide range of jacket options is available: UV-stabilized PVC, halogen-free flame-retardant material, polyethylene with corrugated anti-rodent steel armoring, a jacket incorporating a sealed aluminum tape, and more. A ripcord is located under the jacket to facilitate jacket removal.
A Fig-8 self-supporting cable is available in all fiber-counts.

BENEFITS

  • Small diameter and lightweight
  • Cost-effective
  • Wide operating temperature range
  • Wide range of jacket options

MECHANICAL PROPERTIES

Typical properties are given in the Mechanical Properties Table. Actual properties depend on the cable construction.

OPTICAL PROPERTIES

See the Optical Properties Table.

MATERIALS

See information about the materials used in the Synergy Fiberoptic Cables.

STANDARDS

  • Cables tested according to TIA/EIA-455 and IEC-60794-1-2. For details see Test Methods Table. 
  • Cables meet or exceed Telcordia (Bellcore) requirements for outside plant cables (GR-20) when the appropriate options are chosen
  • Cables ordered with HFFR jackets meet IEC-60332-1 standard.
  • On request cables meeting the IEC-60332-3 can be supplied.

MARKING

Cables are marked as follows
Synergy Cables  -   Fiberoptic Cable  -   Cable Code -  RoHS  -   Length in Meters 
or per customer request. Fig-8 Self-supported cables do not comply with ROHS.

CABLE DIMENSIONS AND WEIGHTS

See list of most frequently ordered cables next page.

ORDERING

You can find the desired cable in the cable list next page or compose your own cable from the Cable Code Definition and Selection Guide.
Standard cable lengths vary with cable diameter. Other constructions, color codes and materials may be available. Please contact the Synergy Cables Marketing Department.

Technical Tables
SL-Series Fiberoptic Cables
Typical Mechanical Properties

Max. Pulling Load

1500 N or the equivalent of the cable weight per km, whichever is higher

Max. Operating Load

60% of the Max. Pulling Load

Max. Compressive Load 

For all SLA cables: 3000 N
For all SLB cables: 4000 N

Repeated Impact

4.4 N.m (J) 3 x 2 impacts

Minimum Bending Radius for Installation

20 times the cable O.D.

Minimum Long Term Bending Radius

20 times the cable O.D. for armored cables, 10 times the cable O.D. for unarmored cables

Twist (Torsion) — Length

180°x10 times , 125 times the cable O.D.

Cyclic Flexing

25 cycles for armored cables
100 cycles for unarmored cables

Operating Temperature Range

-20°C to +70°C (With PE jacket)

Storage Temperature Range

-40°C to +70°C (With PE jacket)

 

Most Frequently Ordered SL Cables
 Part Numbers, Codes, Dimensions and Weights

Part Number

Cable code

Dimensions
(mm)

Weight
(kg/km)

SLA Series

44021D26      

SLA-9-01X02-JAHRH-DD    

12.0

190

45061D09      

SLA-5-01X06-ZP-D    

7.0

40

44061D028

SLA-9-01X06-JH-D   

7.5

60

45081D181     

SLA-6-01X08-ZPWP-DX          

10.5

170

44101

SLA-9-01X10-JP-FRP-PT-DX     

12.5

150

45121D018     

SLA-5-01X12-JH-D  

7.5

60

SLB Series

45241D145     

SLB-5-01X24-ZH-D     

8

65

45241D26       

SLB-6-01X24-ZPRP-DD     

12

145

45241D23      

SLB-6-01X24-ZVWH-XX          

12

245

44041D57      

SLB-9-01X04-ZRH-D            

10.0

145

44041D55      

SLB-9-01X04-ZRP-D            

10

115

Нужен кабель? Оформи заявку бесплатно
Премьера. Оператор X
+