Вся информация на сайте предназначена только для специалистов кабельной отрасли, энергетики и электротехники.
+
 

TX Series Microduct Fiberoptic Cables for Outdoor FTTH Applications

image

APPLICATIONS

  • FTTP applications – low installation cost, short to medium reach in fiber-to-the-home (FTTH), fiber-to-the building (FTTB) or fiber-to-the-Cabinet (FTTCab) applications
  • For blowing into protected micro-ducts 

CABLE DESCRIPTION

The cable consists of 5 to 36 elements stranded in up to 3 layers around a dielectric central strength member and bound in a jacket. The elements are usually fiber-containing tubes, 1.5 mm in diameter; however fillers are also used, when needed, to preserve cable geometry. The tubes are filled with a thixotropic gel to prevent the ingress of water. Each tube contains 2 to 12 fibers.
The tubes and fibers are color coded for easy identification.
Water swelling materials are present between and around the cable core in order to provide full water blocking.
A black, UV resistant, HDPE jacket is extruded over the cable core.

MECHANICAL PROPERTIES

Typical properties are given next page. Actual properties depend on the cable construction.

OPTICAL PROPERTIES

See the Optical Properties Table.

MATERIALS

See information about the materials used in the Synergy Fiberoptic Cables.

STANDARDS

  • Cables tested according to TIA/EIA-455 and IEC-60794-1-2. For details see Test Methods Table.
  • Conforms to IEC-60794-5
  • Cables ordered with HFFR jackets meet IEC-60332-1 standard. On request cables meeting the IEC-60332-3 can be supplied.

MARKING

Cables are marked as follows
Synergy Cables  -   Fiberoptic Cable  -   Cable Code   -  RoHS  -   Length in Meters
or per customer request.

CABLE DIMENSIONS AND WEIGHTS

See list of most frequently ordered cables next page.

ORDERING

You can find the desired cable in the cable list next page or compose your own cable from the Cable Code Definition and Selection Guide.
Standard cable lengths vary with cable diameter. Other constructions, color codes and materials may be available. Please contact the Synergy Cables Marketing Department.

Technical Tables
FTX-Series Fiberoptic Cables

Max. Pulling Load

Depends on cable construction. See cable list below for representative values

Max. Operating Load

60% of the Max. Pulling Load

Max. Compressive Load 

1000 N

Repeated Impact

1.0 N.m (J) – 3 x 2 impacts

Minimum Bending Radius for Installation

20 times the cable O.D

Minimum Long Term Bending Radius

10 times the cable O.D

Twist (Torsion) — Length

180°x10 times , 125 times the cable O.D.

Cyclic Flexing

100 cycles

Operating Temperature Range

-30°C to +70°C

Storage Temperature Range

-40°C to +70°C  

Most Frequently Ordered FTX Fiberoptic Cables
Part Numbers, Codes, Structure, Dimensions and Weights

No. of
Fibers

No. of
Elements

Max. Installation
Load (N)

Diameter (mm)

Weight
(kg/km)

Cable code

Part Number

12

5

300

5.0

24

FTX-9-02x06-D-P-D

44122D61

24

5

300

5.0

24

FTX-9-04x06-D-P-D

44244D57

36

6

300

6.0

30

FTX-9-06x06-D-P-D

44366D4

48

5

300

5.0

24

FTX-9-04x12-D-P-D

44484D14

60

5

300

5.0

24

FTX-9-05x12-D-P-D

44605D20

72

6

700

6.0

30

FTX-9-06x12-D-P-D

44726D1

96

8

700

6.8

42

FTX-9-08x12-D-P-D

44968D57

144

12

700

9.2

62

FTX-9-12x12-D-P-D

4414412D63

216

18

700

9.2

60

FTX-9-18x12-D-P-D

4421618D2

432

36

700

12.8

110

FTX-9-36x12-D-P-D

4443236D4

Нужен кабель? Оформи заявку бесплатно