LG lightguide cables will provide excellent transmission performance and protection of the fibers in a variety of field environments. These aerial optical cables are designed for circumstances where underground cables would be unsuitable or less economical than aerial cables.
* When the terrain is unsuitable for underground cable
* Where a permanent underground cable cannot be satisfactorily established
* Where short term provision for growth is necessary
* Where additional circuits are required on aerial routes which are heavily loaded
* Single mode or multimode fiber
* Easy to install
* Self-support design
* Standard fiber counts : 2-144
OPTICAL FIBER
FILLING A suitable water-blocking compound
LOOSE TUBE Thermoplastic material
CENTRAL STRENGTH MEMBER Metallic type : Solid or stranded galvanized steel wires Non-metallic type : Fiberglass Reinforced Plastic (FRP)
CABLE CORE PROTECTION Plastic tapes. This protection can be replaced by aramid yarn layer
MOISTURE BARRIER (Metallic type only) One laminated aluminum tape longitudinally
FILLER Thermoplastic cylinder which can replace a tube in the cable strand
MESSENGER Stranded galvanized steel wires or Fiberglass Reinforced Plastic (FRP)
OUTER SHEATH Black polyethylene on Ў°eightЎ± shaped including the cable core and the messenger
(In case of 36 fibers)
ITEMS |
UNIT |
TYPE OF CABLES |
||
---|---|---|---|---|
METALLIC TYPE |
NON-METALLIC TYPE |
|||
NO. OF TUBES |
EA |
6 |
6 |
|
NO. OF FIBERS PER TUBE |
EA |
6 |
6 |
|
STRENGTH MEMBER |
TYPE |
- |
STEEL WIRE |
FRP |
DIA. |
MM |
NOM.2.0 |
NOM.2.7 |
|
CORE DIA.(NOMINAL) |
MM |
7.5 |
7.5 |
|
MESSENGER WIRE (S) |
MM |
7/1.8 |
7/1.8 |
|
OUTER SHEATH THICK(NOM.) |
MM |
CABLE CORE : 2.0 MESSENGER : 1.5 |
CABLE CORE : 2.0 MESSENGER : 1.5 |
|
OUTER DIA.(NOMINAL) |
MM |
12.5 ´ 23.0 |
12.5 ´ 23.0 |
|
WEIGHT(APPROX.) |
KG/KM |
330 |
290 |
|
DELIVERY LENGTH(NOM.) |
KM |
1~2 |
1~2 |
CLASSIFICATION |
SMALL SIZE |
MEDIUM SIZE |
LARGE SIZE |
---|---|---|---|
NOMINAL OUTER DIAMETER(MM) |
1.5 |
2.2 |
3.0 |
MAX.NO.OF FIBERS PER TUBE |
1 |
6 |
12 |
MAX.NO.OF FIBERS IN CABLE |
12 |
36 |
144 |
MFD |
CLADDING DIAMETER |
ATTENUATION (DB/KM) |
DISPERSION (PS/NM.KM) |
CUT-OFF WAVELENGTH (NM) |
||
---|---|---|---|---|---|---|
1.310 |
1.550 |
1.285~1.330 |
1.550 |
2M |
||
9.5 |
125 |
0.38 |
0.25 |
3.2 |
18 |
1.100~1.330 |
CHARACTERISTICS |
UNIT |
TYPE OF CABLES |
|
---|---|---|---|
METALLIC TYPE |
NON-METALLIC TYPE |
||
MAXIMUM TENSILE LOAD |
KG |
520 |
520 |
MINIMUM BENDING RADIUS - UNDER NO LOAD - UNDER LOAD |
MM MM |
130 260 |
120 240 |
CRUSH RESISTANCE |
KG/CM |
20 |
20 |
OPERATING TEMP.RANGE |
-40~+70 |
-40~+70 |
NO.OF FIBER |
COLOR |
NO.OF FIBER |
COLOR |
---|---|---|---|
1 |
BLUE |
7 |
BROWN |
2 |
ORANGE |
8 |
BLACK |
3 |
GREEN |
9 |
WHITE |
4 |
RED |
10 |
GRAY |
5 |
YELLOW |
11 |
AQUA |
6 |
VIOLET |
12 |
PINK |
LG-LT-XX1-XX2-X3-XXXX4-X5 XX1 CORE CODE : - 00 : Single fiber per tube, Metallic CSM - 01 : Single fiber per tube, Non-metallic CSM - 10 : Six fibers per tube, Metallic CSM - 11 : Six fibers per tube, Non-metallic CSM - 20 : Twelve fibers per tube, Metallic CSM - 21 : Twelve fibers per tube, Non-metallic CSM XX2 SHEATH CODE : - 00 : All dielectric sheath - 02 : Moisture barrier, PE sheath - 04 : Inner PE sheath, Steel tape armour, Outer PE sheath X3 FIBER CODE : - 0 : Single mode fiber - 9/125§ - 1 : Multimode fiber - 50/125§ - 2 : Multimode fiber -62.5/125§ XXXX4 NUMBER OF FIBERS (0002~0114) X5 COPPER CODE : Number of copper conductors contained in the optical cable (0~4 pairs)
Приобрести эту продукцию можно в Компании "НАЙС КАБЕЛЬ.NET".